Geocomposites

TERRAM Geocomposites, when used in ground stabilisation applications, also provide drainage, reinforcement and / or separation solutions to the design.

TERRAM\\s range of off the shelf geocomposite products cover most applications. In addition, we are proud of our ability to manufacture bespoke products to suit specific applications of a project.

TERRAM has forty years experience of manufacturing geosynthetics for demanding applications throughout the civil engineering industry globally. 

It is important that materials are chosen that will perform consistently and reliably throughout the life of the project.

TERRAM Geocomposite products combine the very best geotextiles, geogrids and geomembranes to answer the specific problems, whether it be soil reinforcement, ground stabilisation, filtration, drainage, protection or erosion control.

Geocells

Typical applications include:
• Site compounds
• Pile cap reinforcement
• Stabilised drainage layer
• No dig tree root protection
• Permeable load supporting surfaces
• Permanent Way ballast stabilisation
• Sub-base stabilisation for block paved areas
• Green access roads and temporary green occasional carparks
• Permanent and temporary access roads, footpaths and cycle paths.

Load Support

• Design Considerations
• Infill quality/properties
• Subgrade strengths
• Traffic conditions

Tree Root Protection

Plastic Porous Paving

Plastic Porous Paving provides a free draining reinforced pavement that is SUDS source control compliant. TERRAM Plastic Porous Paving have been engineered to offer high load bearing capacities to withstand all types of traffic and frequency of use. Plastic Porous Paving is filled with permeable materials, either gravel or a rootzone for grassed surfaces. 

Our porous paving solutions can be used in the following applications:
• HGV access roads and yards
• Fire access routes
• Coach parks
• Gravel and grass car parks
• Driveways
• Helipads and aircraft taxiways
• Cycle and footpaths

Grass Mesh / Engineered Turf

TERRAM Grass Mesh and Engineered Turf solutions, including our market leading GrassProtecta™ grass reinforcement mesh, provide a naturally draining reinforced and stabilised grassed surface, suitable for all types of traffic depending on the intensity of use. Plastic meshes are installed directly onto the existing grass surfaces, allowing the grass sward to grow through the mesh apertures. The grass roots intertwine with the plastic mesh creating a reinforced based for the roots, protection from wear and ultimately a grassed surface that is capable of resisting a level of rutting and deformation caused by traffic. 

If an invisible surface structure is required, we provide a solution that incorporates plastic mesh elements blended in a rootzone which produces a very strong, yet free draining reinforced grassed surface. 

Applications include include:
• Overflow grass car parks
• Grass paths
• Road verges
• Outdoor exhibition grounds
• Helipads and light aircraft taxiways